Optoma OWM3001ST Manual De Usuario página 7

Secondly, then attach the whole mounting plate to the projector
●
According to the diameter of the mounting holes on the bottom of the projector, please select
right size of screws, as shown in the above table. If the projector feet prevent the plate sitting
flush, connecting screw M4 should be used, which can only work with screw M4x8.
or
●
If the diameter of the mounting holes on the bottom of the projector is M5, then M5x25 should
be used. If projector feet prevent the plate sitting flush, spacer (L) should be used
Thirdly, attach the projector to the mount.
C. Using universal slots to connect the projector
●
If universal slots on the mounting plate can cover all the mounting holes of the projector, please
connect the plate directly to the projector with right size screws, as shown on the above table.
6
E/H
G
J
L
E/H/I
G
Without
Connecting
Screw M4
With
Connecting
Screw M4
Insert screws M5x25 ,
marked as J, into the
slots of the mounting
arms, and fix the
mounting plate to
the projector.
Select
Without
E(M4x8)
Connecting
/H(M3x10)
Screw M4
/I(M5x12)
With
Select
Connecting E(M4x8)
Screw M4 only
Select
E(M4x8)
/H(M3x10)
Select
E(M4x8)
only