Publicidad
Step 8
IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER.
FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET
PROVIDED WITH THIS PRODUCT.
WARNING
Serious or fatal crushing injuries
can occur from furniture tip over.
To prevent tip over:
* Install tipover restraint provided
* place heaviest items in the lowest
drawers
* Unless specifically designed to
accommodate, do not set TVs or
other heavy objects on the top of
this product
* Never allow children to climb or
hang on drawers, door, or shelves
* Never open more than one drawer
at a time
Use of tip over restraints may only
reduce, but not eliminate the risk
of tip over
OPTION 1: Attachment into a wall stud (preferred method)
Using a stud finder, locate a stud in the wall. Place your unit against the wall, with the safety bracket
aligned in this location.
To make driving the screw easier, you can drill a 1/8" diameter pilot hole (3mm) through the safety
bracket into the stud.
Drive the screw through the safety bracket into the wall stud. Tighten the screw that was not fully
tighened.
OPTION 2: Attachment into drywall
Position your unit where desired against a wall and mark the wall through the safety bracket, then
move your unit aside.
Drill a 3/16" diameter hole (5mm) into the wallboard. Tap the wall anchor into the hole until it is flush.
Move your unit into location and fasten the wall bracket to the wall anchor with the screw.
Tighten the screw that was not fully tightened.
ameriwoodhome.com
15b
15a
A
B5
For Masonry, Concrete, or other
wall materials:
Consult your local hardware store
for appropriate anchors to securely
attach the safety bracket.
15b
15a
C
hole
stud
wallboard
Publicidad
