Metcal BVX-250 Guia Del Usuario página 16

BVX-250 Series Fume Extraction System
User Guide
REPLACE PRE-FILTER
PULL
PREFILTER
TRAY OUT
REPLACE MAIN FILTER
ROTATE THE
MAIN FILTER
HOLDER 90
DEGREES
COUNTER-
CLOCKWISE
STEP 3
LIFT RELEASE LATCH UP
FULLY AND ROTATE
FILTER ELEMENT
STEP 6
PUSH LATCH BACK DOWN TO ENSURE
FILTER ELEMENT IS LOCKED IN PLACE
REMOVE AND REPLACE
THE PREFILTER
PULL OUT THE FILTER HOLDER
STEP 1
WITH THE FILTER ATTACHED
STEP 4
PULL FILTER
ELEMENT OFF
RETURN FILTER HOLDER &
FILTER TO UNIT
PUSH TRAY BACK INTO UNIT TO
ENSURE IT IS FULLY SEALED
STEP 2
STEP 5
PLACE NEW FILTER ELEMENT
ON HOLDER AND ROTATE UNTIL
FULLY STOPPED
STEP 7
STEP 8
ROTATE FILTER HOLDER 90
DEGREES TO LOCK IN PLACE
16