Publicidad
1
REMOVE COVERS OR FACTORY CROSSBARS
Use a tape wrapped screwdriver to
pry up and remove the covers from
your vehicle.
2
INSTALL PADS
Place the pad into the opening being sure that it is fully seated.
B
Refer to the letter and arrow icon on the pad to identify the
correct placement.
Landing Pad 28 Pack of 4_9813828_Rev1.0 EN
If you have a factory crossbar installed, follow the
instructions that came with the factory crossbar to
remove it.
A
A
B
x4
x4
2/6
Publicidad
