Electro Depot VALBERG FL3 Instrucciones De Uso página 16

C
Cleaning and maintenance
Problem
Weak suction
power
There is abnormal
sound in motor
operation
Cannot be charged
No water is
sprayed from the
rolling brush
There is water
leakage from the
air outlet
Possible Cause
• Dirty water has
reached its
designated capacity
• The rolling brush
or the dirty water
cup may have been
attached incorrectly
• The rolling brush
is entangled with
objects like hair
• The suction nozzle
is blocked
• The HEPA filter
mesh above the
float is dirty
• Low battery
• The suction nozzle
is blocked
• Dirty water has
reached its
designated capacity
• The HEPA filter
mesh above the
float is dirty
• The appliance and
the charging slot
are not properly
contacted
• Clean water cup is
empty
• Clean water cup
is not properly
attached
• Missing HEPA filter
• Missing float
indicator
• HEPA filter is not
dry enough after
washing
• Dirty water has
reached its
designated capacity
15
Solution
• Detach the dirty water cup and empty
the water.
• Re-attach the rolling brush or the
dirty water cup correctly.
• Clean the rolling brush.
• Clean the suction nozzle.
• Clean the HEPA filter
• Fully recharge the appliance before
use.
• Clean the suction nozzle.
• Detach the dirty water cup and empty
the water.
• Clean the HEPA filter
• Check and properly attach the
appliance to the charging base.
• Fill up the clean water cup.
• Re-attach the clean water cup
correctly.
• Re-attach the HEPA filter to the dirty
water cup.
• Re-attach the float indicator.
• Allow the HEPA filter to completely
bair dry before re-attaching it to the
dirty water cup.
• Detach the dirty water cup and empty
the water.
EN