Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Detach the rolling brush
Press the rolling brush release button on the left side.
Pull the rolling brush upward at the left end, and then pull outward to detach the
rolling brush.
Attach the rolling brush
Insert the right side of the rolling brush into the spindle at the right end.
Put the left side of the rolling brush into the left end and align with the slot.
Push the rolling bush in until it clicks into place.
Operations
WARNING!
•
Never use the product to clean the following substances: explosive or flammable
gases, liquids and dust (reactive dust), in addition to magnetic, toxic, flammable
or combustible reactive metal dust (e.g. aluminium). Do not use the product
to clean sharp, hot or incandescent objects at temperatures above 40°C, such
as cigarettes or hot ashes.
•
Do not use this product near working fireplaces or heaters. Doing so may
result in deformation of the product casing.
•
Unplug the charging cable after the Floorwasher is fully charged. Do not
overcharge the battery. Doing so may cause overheating or deformation of
the battery.
CAUTION!
•
Never use the product without the filter or water cups.
•
This product is suitable for hard floor of indoor environment, including waxed
floor, stone floor, rubber floor, marble floor, granite floor, terrazzo floor, solid
wood floor, composite floor, bamboo floor, and all kinds of mirror tiles, porcelain
tiles, etc.
•
If the product is used on uneven surface, the best cleaning effect may not be
achieved.
•
When the Floorwasher is not in use, place it upright against a wall corner to
prevent from tripping over and causing any injuries.
8
EN
Publicidad
