Firmware Upgrade - Lotus 50006 Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 11
Start and End control when this reminder is on. Sedentary time and Sedentary Threshold control the time periods
and the minimum activity amount. When this reminder is enabled, you'll be reminded to move if your activity is
under the Threshold. Enable with the Sedentary reminder switch.
Tap "+" to add an alarm. Set the alarm time and Repeat settings if the alarm should occur on a regular basis.
When enabled, alarms will make the watch vibrate up to 20 times.
2.12 Heart rate test
This test allows automatic heart rate measurement. Set the period from start to end and sedentary time interval
(minutes), Enable with the Heart rate test switch.

2.13 Firmware upgrade

This function checks if new firmware version is available for the watch. Prompt to update and upgrade to the
latest version when there is a new one.
2.14 Disconnect
Your watch will be listed under My Device. Tap the connected device name or swipe left to disconnect.
FREQUENT QUESTIONS
*Do not expose this device to very hot or cold conditions for a long time. Exposure can cause permanent damage.
*Why can't I wear the watch when taking a hot bath?
As bath water temperature can be is high, steam will be generated which can penetrate through the watch's
water proofing.
*The watch can't start up or charge
If your newly received watch doesn't start up, plug in the charging cable to activate the watch.
If your watch can't start up due to too little battery charge or the watch has not been used for a long time, please
plug in the USB cable and charge for at least half an hour for activation.
DISCLAIMER
The method of capturing the heart rate through an optical sensor used by this LOTUS watch does not reach the
level of precision and accuracy of a professional medical device, nor can it guarantee the equivalent stable
readings. The watch cannot replace a medical device in its function of detecting or diagnosing pathologies, heart
or other diseases.
Consequently, with respect to this function, the device is for recreational use only. Multiple factors (including
level of skin contact, pigmentation, tattoos, sudden arm movements etc) can alter the accuracy of the data
provided by the sensor. Therefore, keep in mind that the actual heart rate may be higher or lower than the
reading indicated by the optical sensor at a given time.
If you suspect any anomaly, always consult your doctor and in case of emergency, immediately contact the
emergency services in your area.
FESTINA GROUP assumes no responsibility for any claim that may arise from the use and / or interpretation that
the user of the device and / or third parties may make of the heart rate information provided by their devices.
WARRANTY
1. If quality problems appear caused by manufacturing, materials or design faults within 2 years(since the day
of purchase, we will offer free warranty for. We will offer free warranty for battery and adapter during a 6 month
period providing the watch is used correctly.
2. For faults caused by the user's personal use, no free warranty exists, Examples include;
1). The unauthorized disassembly or refit of the product.
2). The dropping or banging of the product.
3). Any abusive damage or misuse (such as: exposing the watch to water, exaggerated trauma , scratching or
damaging of the peripheral components, etc.), all these are beyond the scope of the warranty.
3. When requesting a free warranty repair, you must provide a warranty card with the stamp of store where the
product was purchased and the purchase date.
4. If you experience problems during the set up or use, please contact the store / the customer service where the
watch was purchased.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

500705000850009

Tabla de contenido