Urmet 1083 Manual De Configuración página 32

7. After a few seconds the video door phone will
switch to configuration mode and a QR code will
appear on the display.
8. After the video door phone displays the QR code,
press the "Continue" button on your smartphone..
9. Press the "Scan" button to start the QR code
reader application on your smartphone. Scan the
QR code shown on the display of the video door
phone.
Scan the QR-Code to registered the device on
the server.
10. The following screen can be used to choose the
name of the device (name that will be displayed
as 'Caller' when receiving the call). It is suggested
that you set the address of your home (street or
city) as a name.
Press "Continue".
32
11. Then activate the WiFi on the smartphone and
access the "CALLFW_XXYYZZ" (es. CALLFW-
112244) WiFi network created by the device.
12. Connect the smartphone to the WiFi of the device
and press the "Continue" button.
13. To operate, the device must be connected to
your home LAN network and this in turn must be
DS1083-160A