Packaging Contents / Contenido del embalaje / Contenu de l'emballage
Rake Head with Hardware
A
Cabeza del rastrillo con herramienta
x1
Tête de râteau avec quincaillerie
Directions
1
Line up the groove in the grip end of handle
(B) with the tab in handle center (C).
IMPORTANT: See Step 1 Image. Swiftly
!
push the two pieces together as far as pos-
sible. Tap the grip end of handle (B) on the
floor until the connection is secure. The end
of handle center (C) should be flush with the
shoulder on handle (B).
To avoid damage to your floor or the
product, place a piece of scrap wood
(not provided) on the floor before
TIP
tapping the handle. You may also
secure the handle connection by tap-
ping the grip end with a rubber mallet.
2
Line up the groove in the head end of handle
(D) with the tab in handle center (C). Swiftly
push the two pieces together as far as pos-
sible. Tap the wood end of handle (D) on the
floor until the connection is secure. The end
of handle center (C) should be flush with the
shoulder on handle (D).
To avoid damage to your floor or the
product, place a piece of scrap wood
(not provided) on the floor before tap-
TIP
ping the handle. You may also secure
the handle connection by tapping
the wood end with a rubber mallet.
3
Unscrew the wing nut and remove the bolt
from the rake head. Insert assembled handle
(B/C/D) into head (A). Align hole in handle
with hole in rake head.
4
Insert bolt through top of head, handle, and
washer. Make sure the square on the bolt
head is aligned and fully inserted into the
square hole on the rake head. Attach with
wing nut. Tighten by hand.
Assembly Instructions
22 Inch Steel Leaf Rake - Multi-Material Handle
Handle - Grip End
B
Mango - Extremo
de agarre
x1
Manche - Poignée
1
!
Tab
Lengüeta
Languette
Groove
Ranura
Fente
Shoulder
Borde
Rebord
2
No Tools
Required
Handle - Center
C
D
Mango - Centro
x1
x1
Manche - Centre
3
4
Align
Alinee
Alignez
5
min
Easy to
Assemble!
Handle - Head End
Mango - Extremo de
la cabeza
Manche - Tête