Publicidad
Idiomas disponibles
Idiomas disponibles
Wall mounting
− In order to prevent overturning, this product must be used
− A cross-head screwdriver
− Ensure that the position where the drill hole is to be made is
− Make sure to use the appropriate hardware and tools based
1. Move the product to the intended use location.
Mark the position of the drill holes on the wall for drilling.
2. Drill two holes in the wall and place the wall plugs
the screws
10
to mount the product to the wall (see Fig. F).
The product is now mounted to the wall. Check the tightness of all connections
before using the product.
Cleaning
NOTICE!
Risk of damage!
Improper handling of the product may result in damage to the
product.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles, or sharp or metallic cleaning utensils such
as knives, hard scrapers and the like.
They could damage the surfaces.
1. Use a damp cloth to wipe off the product.
2. Let all parts dry completely.
with the wall attachment elements provided.
required for securing the product to the wall.
free from pipes and other obstructions.
on what type of wall you have. Consult your local hardware
store for advice on suitable fixings.
through the screw holes on the top frames and tighten them
13
and an electric drill
9
into the holes. Run
Wall mounting
14
are
11
Publicidad
