Publicidad
Idiomas disponibles
Idiomas disponibles
9. Setting mode
In standby mode, press the "Power" button to enter the setting mode. Use the "UP" / "DOWN" button to
select the required setting. Press the "Camera" button to
• enable or disable the selected setting.
• enter the setting options and enable the required setting option, which can be selected with the "UP" /
"DOWN" button.
Press the "Power" button to return to the standby mode.
Setting
Print density
Resolution
Image quality
Self timer
3x Continuous shooting
Loop recording
White balance
26
Description
When the camera is fully charged, the print density will be relatively
high. When the battery is almost empty, the print density will be re-
latively low. Use this setting to adjust the print density accordingly
(1 = low, 8 = high).
Adjust the video quality: HD (1280x720 pixel) or FHD (1920x1080
pixel).
Adjust the image quality: 1, 3, 5, 8, 10, 12 or 24 MP.
Causes a short delay between pressing the "Camera" button and
taking the photo.
Take 3 pictures in a row.
Adjust or turn off the loop recording setting.
Select a setting for the white balance according to the prevailing
light conditions.
Publicidad
