TFA 60.2042 Instrucciones De Uso página 10

TFA_No. 60.2042_Anleitung 07.02.2024
Digital alarm clock with textile display and LED digits
C: Housing (Fig. 3):
C 1: USB-C port
6. Getting started
• The alarm clock can be operated with 3 x 1,5 V AAA batteries (not included). The batteries maintain the
clock operation in the event of blackout or other power failure. In pure battery operation, the display is acti-
vated briefly each time a button is pressed. Continuous illumination of the display only works with USB-/
mains connection.
• Optional: Open the alarm clock's battery compartment. Insert three new AAA 1.5 V batteries, polarity as
illustrated. Close the battery compartment.
• For a permanent display light and to save battery life, use the supplied USB cable.
• Connect the device to a suitable USB power source, such as a computer, or use a suitable power adapter
(not included).
• A beep tone is heard and 0:00 appears on the display.
7. Settings
• Press and hold the UP or DOWN button in setting mode for fast mode.
• The device will automatically quit the setting mode if no button is pressed for 10 seconds.
7.1 Setting of the time and date
• Press and hold the MODE button in normal mode for three seconds to enter the setting mode.
• The first adjustable value flashes on the display.
• Use the UP or DOWN button to make the desired setting, while the value flashes.
17:01 Uhr Seite 10
C 2: Battery compartment
– 18 –
Digital alarm clock with textile display and LED digits
• Confirm with the MODE button and go to the next setting.
• The sequence is shown as follows:
– 24/12-hour format (default: 24HR)
– Hour, minutes
– Year, month, day
• Press the MODE button to confirm the setting or wait 10 seconds, the unit will save the setting automati-
cally.
7.2 Alarm settings
• Press the ALARM button in normal mode to enter the alarm mode.
• 6:00 (default) or the last adjusted alarm time appears on the display.
• Press and hold the ALARM button for three seconds to enter the alarm setting mode.
• The first adjustable value flashes on the display.
• Use the UP or DOWN button to make the desired setting, while the value flashes.
• Confirm with the ALARM button and go to the next setting.
• The sequence is shown as follows:
– Hour, minutes
– Snooze interval 5 to 20 minutes (default:5)
– Alarm frequency 1-7 (daily), 1-6 (weekdays), 1-5 (Monday to Friday), default setting 1-7
• Confirm the setting with the ALARM button or wait 10 seconds, the device will automatically use the set-
tings you have made so far.
– 19 –