Silvercrest SMW 800 C3 Instrucciones De Uso página 66

6) Press the Start/Quick start button
The icon flashes. The start time is displayed.
The microwave oven automatically starts the
cooking process at the programmed time. The
appliance gives off a beep when it starts.
TIPS
To erase the saved start time and thus cancel the
saved procedure, press the Stop button
The symbol disappears and the time is
displayed.
Cleaning and care
DANGER – ELECTRIC SHOCK!
► Before cleaning the appliance, disconnect
the power plug from the mains power socket!
There is a risk of electric shock!
NEVER immerse the appliance in water or
any other liquid!
ATTENTION! MATERIAL DAMAGE!
► Do not use abrasive or aggressive cleaning
materials. These may damage the surfaces
of your appliance.
■ Always keep the interior of the microwave oven
clean.
■ If splashes of food or spilt liquids stick to the
walls of the microwave, wipe them off with a
damp cloth.
■ Use a mild detergent if the microwave is more
heavily soiled.
■ Avoid using cleaning sprays and other aggres-
sive cleaning agents, as they can cause stains,
smears or clouding of the door surface.
■ Clean the external surfaces with a damp cloth.
■ To avoid damage to the functional components
in the interior of the microwave, do not allow
liquids to seep in through the ventilation slits
SMW 800 C3
■ Remove splashes or soiling. Clean the door,
.
both sides of the viewing window, door seals
and adjacent components with a damp cloth.
Do not use abrasive cleaning agents.
■ If condensation accumulates on or around the
outside of the door, wipe it off with a soft cloth.
This can happen if the microwave is operated in
extremely humid conditions.
.
■ Clean the glass plate
clean the glass plate
hot water with a little washing-up liquid.
■ Wipe the rotator assembly
cloth.
■ Clean the grill stand
dry it well.
■ Remove odours regularly. Put a deep microwave
bowl with a cup of water, juice and peel of a
lemon into the microwave. Heat for 5 minutes.
Wipe off thoroughly and rub dry with a soft
cloth.
■ If the bulb in the microwave needs replacing,
arrange for it to be exchanged by a dealer or
consult our Service Department.
Storage
■ Store the cleaned appliance in a clean, dust-free
and dry place.
Troubleshooting
There is nothing on the display
■ The plug is not inserted into a mains power
socket. Check the plug.
■ The mains power socket is defective. Try another
mains power socket.
■ The display
Service.
.
regularly. You can also
in the dishwasher or in
off with a damp
in hot dishwater and
.
is defective. Contact Customer
GB │ MT │
63 ■