Descargar Imprimir esta página

JANE CONCORD iXPERT Manual De Instrucciones página 17

Publicidad

Idiomas disponibles

Idiomas disponibles

To change the height of the straps, follow the steps below:
• Pull the ring on the top part of the headrest (1a), this will unlock the headrest position.
Move the headrest (1) to the right position for the child and release the lever. Move the
headrest until you hear the locking click. Pull the headrest to make sure that it is locked
in place. (3e)
NOTE: Adjust this height as the child grows
_ Removing the seat when installed using ISOFIX:
• Release the ISOFIX anchors by pressing both ISOFIX buttons (5a). The signals on the
ISOFIX buttons (5b) will turn red.
• Remove the seat. Press the ISOFIX anchors (5) to store them inside the base.
_ 2 Reclining the seat
The iXPERT seat is reclined using a lever found underneath the feet (9). It has 5 positions.
This action, when the seat is used as a booster seat with backrest, requires the vehicle 3-point
seat belt to be adjusted, in this case it should be carried out while the vehicle is stationary.
• To recline the seat, pull the lever forwards and slide the seat to the required position. (5a)
EN
28
_ INFORMATION ABOUT THE GUARANTEE
- This item is guaranteed against manufacturing defects as stipulated in the legal Directives
and/or regulations in force on guarantees for consumer goods applicable to the European
Union and those of the country in which it is marketed.
- It is essential to present the purchase invoice or receipt in order to process the guarantee
through the seller of the item or, failing that, through the manufacturer.
- The guarantee excludes anomalies or faults caused by misuse, non-compliance with the
safety regulations and instructions for use and maintenance provided, or due to wear and
tear caused by normal use and regular handling of the item.
- The label containing the serial number of your model must not be torn off under any
circumstances as it contains information relevant to the guarantee.
EN
29

Publicidad

loading