Stinger HEIGH10 UN1810E Instrucciones De Montaje página 8

Using a Double DIN Dash Kit:
4A
Radio chassis mounts to the brackets attached to the kit main frame
Display Adjustment & Mounting:
1. Install the dash kit side brackets to the main frame.
2. Making sure to use all 8 screws, loosely attach the radio module & mounting bracket assembly to
the side kit brackets. (FIG. C)
a. (4x) #10 X 3/8 screws for the plastic mounting bracket locations.
b. (4x) M5 X 10 or (4x) M4 X 10 screws for the radio module locations (use any combination of
screws to locate the radio in the best position).
3. Attach the display to the bracket assembly by
hooking bottom spring hook and then pushing up and
hooking top hooks. (FIG. D)
8
FIG. C
AFTERMARKET
DASH KIT
(NOT INCLUDED)
M5 X 10
#10 X 3/8
Coarse Thread Screw
FIG. D
HOOK BOTTOM
FIRST, THEN TOP
NOTE: BOOT AND DASH KIT NOT SHOWN