Publicidad
Idiomas disponibles
Idiomas disponibles
Multi-Color LED Strobe Light
English
Product Information
The ENFORCER Multi-Color LED Strobe Light provides all the functions of a regular strobe light,
but with more versatility. The light can change between seven different colors set manually via DIP
switches or triggered by an external device via 3 trigger input wires. There are 5 vertical LED strips,
making the light more visible from various directions, and a variable resistor to adjust flashing
speed. The strobe's LEDs have an operating life of 50,000 hours — over 160 times that of a
regular strobe light. No more bulbs to replace!
7 Colors possible – Red, green, blue, cyan, magenta, yellow, and white
LED Operating life of over 50,000 hours (over 5.7 years)
Simple 2-wire installation with reverse polarity protection
Set color via DIP switches, or trigger colors with an external device via 3 trigger input wires
Utilizes high-intensity LEDs
5 Vertical LED strips (25 LEDs total) increase visibility from various directions
Adjustable strobe speed, 60~260 times/min
High-impact resistant case and high-impact, heat-resistant lens
IP66 Weatherproof when properly installed
Parts List
1x Strobe light and lens
Dimensions
Top View
3
15
(100mm)
2
2x Mounting screws with "O" rings
Side View
3
/
"
1
/
"
8
16
(79mm)
/
" (22mm)
7
8
/
"
29
16
(54mm)
12" (305mm)
SECO-LARM U.S.A., Inc.
1x Manual
Bottom View
2
/
"
13
16
(71mm)
Mounting holes
Publicidad
