Publicidad
Idiomas disponibles
Idiomas disponibles
EU DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY
Identification Number:
Manufacturer:
Company Name:
MOTOPPAR INDÚSTRIA E COMÉRCIO DE AUTOMATIZADORES LTDA.
Address:
AV. DR LABIENO DA COSTA MACHADO, 3526
GARÇA, SÃO PAULO, 17406-200 - BRASIL
Authorized Representative / Person authorized to compile the Technical File:
Company Name:
AUTOMATISMOS PPA EUROPA S.L
Address:
CALLE JOAN FUSTER ORSTELLS, 13, LOC-3
SAINT FELIU DE LLOBREGAT, 08980, BARCELONA - ESPAÑA
This declaration of conformity is issued under the sole responsibility of the manufacturer, which
declares that:
The following partly completed machinery is the object of this declaration:
Product Type:
Control board to operators for doors, gates, barriers and others.
Models:
Triflex Connect Brushless 24V CE, Triflex Connect CE, Triflex Connect Full Range CE,
Triflex Connect Dupla CE, Agility Hibrida CE.
The object of the declaration described above is in conformity with all applicable requirements of
Directive 2006/42/EC on machinery.
The object of the declaration described above is in conformity with the relevant Community
harmonization legislation:
DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic
compatibility
DIRECTIVE 2011/65/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic
equipment
The relevant harmonised standards considered for compliance are:
Machinery Directive (2006/42/EC):
BS EN 60335-1:2012+AC:2014+A11:2014, BS EN 60335-2-103:2015
EMC Directive (2014/30/EU):
EN IEC 61000-6-2:2019, EN IEC 61000-6-3:2021
RoHS Directive (2011/65/EU).
The relevant technical documentation is compiled in accordance with Annex VII, part B of
Directive 2006/42/EC;
In response to a reasoned request by the national authorities, the relevant information will be
transmitted;
The partly completed machinery must not be put into service until the final machinery into which
it is to be incorporated has been declared in conformity with the provisions of the Machinery
Directive (2006/42/EC)
GARÇA, BRASIL - 18/11/2022
MOTOPPAR INDÚSTRIA E COMÉRCIO DE AUTOMATIZADORES LTDA.
26
CE PPA 002 (Revision: 0)
1 – PRESENTACIÓN: CARACTERÍSTICAS TÉCNICAS DEL SISTEMA
La Central de comando Electrónica Triflex Full Range con pantalla permite que todos sus
parámetros sean definidos a través del programador electrónico PROG en cuatro idiomas
(portugués, inglés, español o francés). Ella puede ser instalada en todos los modelos de
automatizadores de PPA con motores de inducción.
Ella posee una memoria EEProm1 que almacena los códigos de los Transmisores graba-
dos de forma encriptada. La Central es también compatible con Transmisores de Código
Rodante (variable) con protocolo propio de PPA. Se puede accionar el sistema por control
remoto, a través del receptor de radiofrecuencia incorporado, un receptor suelto o por
cualquier otro dispositivo que tenga un contacto NA (normalmente abierto) como, por
ejemplo, una botonera.
2.1 – CONEXIONES ELÉCTRICAS
Vea las conexiones eléctricas en general en el gráfico abajo:
M
MOTOR DE
INDUCCIÓN
LUZ DE GARAJE (OPCIONAL)
ELECTROCERRADURA (OPCIONAL)
CABLE DEL ENCODER
Samuel Peres
CEO
ES – ESPAÑOL (traducido del manual original)
ELECTRÓNICO
2 – CENTRAL CONTROLADORA
RED ELÉCTRICA
100 - 230 V
50 / 60 Hz
JUMPER
HRF
PROG
RECEPTOR
SUELTO
(OPCIONAL)
27
Publicidad
