Sharp DR-P520 Manual Del Usuario página 18

18
NOTE: The current scan setting will have a
Audio mode
You can choose which audio mode the radio plays
in. There are two modes to choose from. "Stereo
Allowed" will enable the radio to play incoming
stereo signals. Most broadcasters will broadcast in
stereo. "Forced Mono" is a way to bring clarity to
weaker signals.
NOTE: You may wish to select 'Stereo Allowed' if you
are listening to your radio using headphones.
1. Enter the menu options and select <Audio
setting>.
2. Use the and
preference. Options are: Forced Mono and
Stereo Allowed. Short press the
NOTE: The current setting will have a
.
buttons to select your
.
.
Storing an FM station preset
Your radio can store up to 40 FM stations for easy
access. These presets do not affect your BestTune™
or DAB presets.
1. Tune the radio to the station you wish to
preset.
2. Long press the
read <Save to Preset> and a list of numbered
preset locations (1-40).
3. Use the and
preset location where you want to save the
station (1-40).
4. Press the
read <Preset X saved>, where 'X' is the preset
number (1-40).
NOTE: If a station is already saved under a preset,
storing a new station will overwrite the existing one.
button. The display will
buttons to select the
button. The display will