ECOVACS GOAT G1 Instalación página 14

2 Bind the Navigation Beacon to GOAT
Scan the QR code or input the passkey on the Navigation Beacon to
add your beacon via the App. Then you will hear a sound of "beep" if
the Navigation Beacon is successfully bound.
Please make sure when you try to bind the Navigation Beacon:
• Keep the Navigation Beacon near GOAT (within 1 m) when operating.
• DO NOT lay it on the ground.
• DO NOT hold the upper Beacon.
• Make sure that the Signal Receiver on GOAT is lifted up.
• Up to 10 Navigation Beacons can be bound to one GOAT.
• Put the Navigation Beacon to be unbound near your GOAT and
unbind it in the App. If not, you cannot unbind the Navigation Beacon
thoroughly. The binding relationship still exists even if you remove the
Navigation Beacon from App by force. By the way, the Navigation Bea-
con removed by force can be rebound to the current GOAT and unable
to be bound to other GOAT.
EN 14
123456789 123456789
3 Install the Navigation Beacon
General principles:
1. Signal coverage radius of each Navigation Beacon is 45 m.
2. Make sure that signal coverages overlap each other to cover the lawn
as much as possible.
45m