ECOVACS GOAT G1 Instalación página 6

INSTALLATION
Before use, here are some steps you need to complete. Please follow the instructions below to install the Station.
1
Assemble the Station
1. Place the Station on an open and flat lawn with no slope or rock.
Ensure that there are no objects (e.g. trees, balls or houses) within 2 m
on left and right, and 2 m in front of the Station.
GOAT can still guard your property with the Panoramic Camera
when charging in the Station. For a better guarding result, please try
to guarantee that there is a broad view in front so that your GOAT can
better guard your lawn.
2. If you want to remotely control your GOAT, put the Station as close
as possible to a place with strong Wi-Fi signal.
EN 6
3. Make sure that the grass around the Station is no longer than 6 cm.
Overgrown grass may affect the recharging.
6cm
4. Remove the sticker. Put the Base connector outward in case it is
squeezed during the operation.