Publicidad
Idiomas disponibles
Idiomas disponibles
Graphic Display -
•
TIG Mode
•
2stroke or
4stroke Mode
•
Pulse Frequency.
Use the Mode Key - 1 - to go back to the TIG main screen after desired parameters are adjusted.
Tig Function Setup Key -
Follow instructions at paragraph 6.0 - Connection and Setup for TIG Welding
7.2
6.3
TIG
12
12
-
2
Figure 10
-
3.1
In PULSED Mode use the Regulation Knobs - 7.2 - and - 5 - to
adjust the following parameters on the main screen:
Left Knob - 7.2 - adjusts the Pulse Frequency (20-250Hz).
Right Knob - 5 - adjusts the maximum value of the Pulse current.
5
Figure 11
QUICK START CHART
5
• PULSED :
Pulse Frequency
Ton/T
I MAX
I MIN
• NORMAL
•
•
•
•
•
•
• 2T / 4T
• SLOPE UP
5
• SLOPE DOWN
• CRATER Filler (4Stroke only)
• POST GAS
• DX -
• SX -
• DX -
• SX-
Real Current
Set Current
I Min / Base Current
Final Current (4stroke only)
Post gas expressed in seconds
Slope down
I MAX/Peak Current
Pulse Frequency
Welding Current
Slope Down
31
Publicidad
