CAUTION:Carefully readthrough thisentireoperator's m anual before using yournewworklight. Payclose
attention tothe Rules ForSafeOperation, Warnings a ndCautions. Safety, performance anddependability
havebeengiven toppriority inthedesign of thisworklight m aking iteasytomaintain andoperate. I fyouuse
yourworklight p roperly andonlyforit'sintended use,youwillenjoy yearsofsafe,reliable service.
SAFETY AND INTERNATIONAL
SYMBOLS
This operator's manual describes safety and international symbols and pictographs that may appear on this
product. Read the operator's manual for complete safety, assembly, operating and maintenance, and repair
information.
MEANING
Do not expose to rain or use in damp locations.
READ ALL INSTRUCTIONS
n
B
KNOW YOUR WORKLIGHT.
Read operator's
manual carefully. Learn its applications and
limitations as well as the specific potential
hazards related to this light,
•
USE ONLY RECOMMENDED BATTERY PACK
WITH YOUR WORKLIGHT. Any attempt to use
another battery pack will cause damage to your
worklight and could possibly explode, cause a fire,
or personal injury.
M
REMOVE BATTERY PACK FROM
WORKLIGHT
BEFORE REPLACING BULB OR
•
PERFORMING
ANY ROUTINE MAINTENANCE
OR CLEANING.
•
DO NOT DISASSEMBLE
YOUR WORKLIGHT.
•
DO NOT PLACE WORKLIGHT OR BATTERY
PACK NEAR FIRE OR HEAT. They may
explode. Also, DO NOT dispose of a worn out
battery pack by incinerating. Do not incinerate
the battery, even if it is severely damaged or
completely worn out. The battery may explode in
•
fire.
•
DO NOT STORE YOUR WORKLIGHT
IN A
•
DAMP OR WET LOCATION. DO NOT STORE
IN LOCATIONS WHERE THE TEMPERATURE
IS LESS THAN 50°F OR MORE THAN 10O°F,
Do not store in outside sheds or in vehicles.
DO NOT PERMIT CHILDREN TO USE
WORKLIGHT
UNSUPERVISED.
It is not a toy.
The temperature of the bulb will become hot after
being on for only a short period of time, This hot
temperature can cause burn injury if touched and
can create sufficient heat to melt some fabrics.
_i
WARNING:
If wrapped or in contact with
fabrics, the worklight lens can produce sufficient
heat to melt some fabrics. To avoid serious
personal injury, never allow the worklight lens to
come in contact with anything.
KEEP WORK AREA CLEAN. Cluttered areas
and benches invite accidents.
AVOID DANGEROUS
ENVIRONMENT.
KEEP LIGHT DRY, CLEAN, AND FREE FROM
OIL AND GREASE. Always use a clean cloth
when cleaning. Never use brake fluids, gasoline,
petroleum-based products or any strong solvent
to clean your worklight.
STAY ALERT. Watch what you are doing and
use common sense. Do not rush.
CHECK DAMAGED PARTS. Before further use
of this worklight, a part that is damaged should
be carefully checked to determine that it will
operate properly and perform its intended
function. Do not use worklight if it does not
function properly.