Publicidad
Idiomas disponibles
Idiomas disponibles
Digital Multibandradio - Use instructions
Setting the alarm mode
1. Push the MODE button one time. The set alarm time will flash in the
display.
2. Select the alarm mode with the SET button.
• Beep sound for 30 seconds:
If you push the SET button one time, the symbol " " will appear in the
display.
When getting to the set alarm time, a beep sound will be heard. If no button
is pushed, the alarm sound will automatically turn off after 30 seconds.
• Beep sound + reminder function:
If you push the SET button twice, the symbols " " and " " will appear in the
display. When the set alarm time is reached, a beep sound will be heard.
An individual beep sound can also be heard at the top of every hour.
• Reminder function:
If you push the SET button three times, the symbol " " will appear in the
display.
An individual beep sound can be heard at the top of every hour.
3. Push the MODE button three times to switch to normal mode. The time
will be shown.
Turning off the alarm ahead of time
Push the MODE button while hearing the alarm sound to turn off the alarm
until the next day.
Listening to the Radio
1. Turn the device on by moving the POWER ON/OFF switch (7) to the
ON position. Turn the VOLUME control until you have reached the desired
volume.
2. Select the required frequency band. Slide the frequency range switch
(9) to the desired position.
• Very high frequency (VHF) = FM,
• Medium wave (MW) = AM,
• Shortwave (SW) = SW switch (1 to7)
3. Pull out the telescopic antenna and change its position to improve the
reception.
4. With the TUNING control (4) you can tune in to the desired station. The
frequency currently set is shown in the display.
5. Please turn the device off after use.
13
Publicidad
