Publicidad
Idiomas disponibles
Idiomas disponibles
Surge Protector
Instructions
1. Plug the surge protector into a standard grounding duplex wall receptacle.
Ensure that there are no exposed conductors.
2. Make sure electronic equipment is turned off before plugging into the surge
protector outlets. Do not use extension cords to connect equipment to the
surge protector.
3. Move power switch to "ON." Your surge unit should be providing surge
protection. Check indicator light(s) periodically (see note). The glowing surge
indicator light shows that surge protection is being provided.
4. Connected equipment can now be turned on.
NOTE: Check the blue "Protected" and green "Grounded" indicator lights
periodically and after a storm or power outage. A glowing blue indicator
light shows that surge protection is being provided. In the event that
the protection capacity is exceeded by a power surge or the protection
components expire*, the indicator light will not be lit and the power will
be permanently shut down to the outlets, ensuring surge protection
for your electronic equipment. In this event, the Connected Equipment
Warranty is no longer valid and the surge protector should be replaced.
A glowing green indicator light shows that your surge protector is
plugged into a grounded receptacle and that your surge protector's
ground protection components are providing protection from
ground surges. If the "Grounded" indicator light stops glowing, it is
possible that the surge protector's ground protection components
have expired or that the wall receptacle is no longer grounded.
Surge protector — limited-lifetime warranty
Jasco Products Company warrants this surge protector to be free of defects
in workmanship and materials for the life* of the surge protector. If such
a defect should arise during the life of the surge protector, Jasco will, at
its option, either repair or replace the surge protector without charge. This
warranty does not cover damage caused by lightning, accident, misuse or
alterations to the surge protector.
* This surge protector, like all surge protectors, has a finite lifespan. Even under
normal circumstances and in the absence of defects, the product's life will expire
when the surge protector's component capacity has been exceeded, thereby
ceasing to provide protection from surges.
Warranty Replacement Procedure
1. Call Jasco Customer Information Center at
1-800-654-8483 to receive a Return Authorization Number (RA#),
shipping instructions and a prepaid return address label.
2. Return the Jasco surge protector, freight prepaid, to Jasco
Products Company. Surge protectors returned to Jasco must
have an RA# included in the mailing address to be accepted.
3. The original purchaser will be asked to send the surge protector,
a copy of the sales receipt for the product, his/her name,
address, phone number and a description of the problem.
Connected Equipment Warranty
Equipment replacement guarantee for surge model
14096 Maximum warranty amount: $400,000(USD)
NOTE: This device is not a lightning arrestor. It will not afford protection when
lightning strikes nearby power lines, the house, service entrance or antenna.
The Warranty is void if a power disturbance damages your equipment through
the coax, phone or network lines.
Jasco will pay up to the maximum warranty amount offered for the surge
protector purchased to repair or replace up to an amount equal to the
fair market value or the original purchase price, whichever is less, of your
electronics equipment if damaged by a transient surge (except those caused
by direct lightning) within the life* of the surge protector while properly and
directly connected to this surge protector. JASCO DISCLAIMS AND ASSUMES
NO LIABILITY FOR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES,
INCLUDING BUT NOT LIMITED TO LOSS OR DAMAGE TO SOFTWARE OR DATA
OR DAMAGES OR COSTS ASSOCIATED WITH BUSINESS INTERRUPTION OR
OTHER DAMAGES DUE TO LOSS OR DAMAGE TO EQUIPMENT, SOFTWARE OR
DATA. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to
you. This warranty gives you specific legal rights, and you may also have other
rights that vary from state to state.
This warranty is secondary to any existing coverage of any connected
equipment, including but not limited to any manufacturer's warranty,
extended warranties or insurance coverage.
To qualify for a connected equipment warranty:
1. All connected equipment must be safety certified by a Nationally
Recognized Testing Laboratory.
2. The Jasco surge protector must be plugged into properly wired
and grounded outlets, no extension cords, adapters, other ground
wires, or electrical connectors may be used, with the sole exception
of other standard Jasco 120 Volt products approved for that use.
The installation must comply with all applicable electrical and safety
codes set forth pursuant to the National Electrical Code (NEC).
3. Any claim under the warranty policy must be made within 15 days of the
date of the alleged damage to the connected equipment.
For connected equipment coverage, the following conditions must
be satisfied:
A) All equipment eligible for warranty coverage must be
plugged directly into the Jasco surge protector. Equipment
connected to the protected equipment, but not plugged
directly into the surge protector will not be covered.
B) The equipment must have been damaged by a covered power
disturbance that passed through the Jasco surge protector.
C) The Jasco surge protector must be damaged from the power disturbance.
D) The Jasco surge protector's protection capacity
must not have been exceeded.
Connected equipment claim procedure
1. Call Jasco Customer Information Center at 1-800-654-8483 to receive a Return
Authorization Number (RA#), shipping instructions and a prepaid return
address label.
2. After you receive the return address label, return the Jasco surge protector,
freight prepaid, to Jasco Products Company. Surge protectors returned to
Jasco Products Company, Inc. must have an RA# included in the mailing
address to be accepted.
3. Jasco will determine whether the damage to your equipment is covered by
this warranty policy. If you are covered, a claims adjuster will contact you
and Jasco will do one of the following at its own discretion:
a) Authorize a service center to repair damaged equipment.
b) Replace damaged equipment with equivalent or better.
c) Reimburse customer the fair market value of the damaged equipment.
d) Reimburse customer the initial purchase price of the damaged
equipment (customer to provide dated bill of sale).
4. Jasco retains the right to determine whether the damage to the connected
equipment is due to Jasco surge protector failure by requesting damaged
equipment be sent to Jasco for inspection.
FCC Statement:
Suppliers Declaration of Conformity | Model #: 14096 | Jasco Products
Co., 10 E. Memorial Rd., Oklahoma City, OK 73114, www.byjasco.com
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC NOTE: The manufacturer is not responsible for
any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FCC — U2ZZW4202
WARNING
RISK OF ELECTRIC SHOCK
Any changes of modifications not
• DO NOT USE IN WET LOCATIONS
expressly approved by the grantee
• KEEP CHILDREN AWAY
of this device could void the users
• USE INDOORS ONLY
• FULLY INSERT PLUG
authority to operate the equipment.
RISK OF FIRE
This device complies with Part 15 of
• DO NOT EXCEED ELECTRICAL RATINGS
the FCC Rules. Operation is subject
• DO NOT PLUG INTO ANOTHER
to the following two conditions: (1)
RELOCATABLE POWER TAP, SURGE
PROTECTOR OR AN EXTENSION CORD
this device may not cause harmful
NOT FOR USE WITH
interference and (2) this device must
• AQUARIUMS OR OTHER
accept any interference received,
WATER-RELATED PRODUCTS
including interference that may cause
• GENERATORS, POWER INVERTERS,
HEATERS, SUMP PUMPS, OR CAR,
undesired operation.
MOTORCYCLE OR GOLF CART BATTERY
CHARGERS
• MEDICAL LIFE-SUPPORT PRODUCTS
MADE IN CHINA
GE is a trademark of General Electric Company and is
under license by Jasco Products Company LLC, 10 E.
Memorial Rd., Oklahoma City, OK 73114.
This Jasco product comes with a limited-lifetime warranty.
Visit www.byjasco.com for warranty details.
Questions? Contact our U.S.-based Consumer Care at
1-800-654-8483 between 7AM—8PM CST.
CAUTION
14096 V5
8/30/19
Publicidad
