Publicidad
Choose setup
option
OPTION 1: Basic setup
EN
Choose Basic setup for printing on a local network or USB connection.
OPÇÃO 1: Configuração básica
PT
Escolha a Configuração básica para imprimir em uma rede local ou conexão USB.
OPCIÓN 1: Configuración básica
ES
Elija la configuración básica para imprimir en una red local o conexión USB.
1.
EN
On the control panel, choose your connection method:
Ethernet
i.
ii.
Wi-Fi
i.
ii.
iii.
USB
i.
ii.
2.
Install printer software.
i.
ii.
4
Escolher opção de
configuração
1
2
Connect an Ethernet cable from the printer to the same network as the computer.
Press "Continue" on the control panel to confirm the IP address. Then
continue with the steps on the control panel until you reach the home screen.
Make sure the computer Wi-Fi is turned on and in range of the printer during
setup.
On the control panel, enter Wi-Fi information when prompted. Choose the
same network as the computer.
Continue with the steps on the control panel until you reach the home screen.
Connect the USB cable to the port on the back of the printer and to the computer.
Continue with the steps on the control panel until you reach the home screen.
Go to hpsmart.com/download to download the HP software and print drivers.
Install the software and complete setup.
Elección del tipo
de configuración
Publicidad
