Donner HUSH-X Manual De Usuario página 6

GUITAR BRIDGE
String action/height adjustment
STRINGS REPLACEMENT
Once the strings are aged, bent, rusted, or faded, please replace your strings in
time. We recommend that you replace all strings at once.
1. Remove the old string: First loosen the bridge peg, then remove the lock screw
on the headstock and take out the string.
2. Replace the old strings with new strings: First open the battery cover, then take
a new string through the corresponding steel ball slot and bridge saddle. Make
sure the steel ball end of the string is fully fixed into the slot.
3. Through the headstock: Pull the other end of the new string through the
headstock, making sure to keep holding the string straight (Additionally, using
included string tube tools can make string replacement much easier to
implement). Then tighten it with the screws.
4. After completely tightening the screws, you can tune the guitar to the standard
pitch.
3
1
2
4
Scale length adjustment