Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Please read and follow all of the instructions & safety precautions detailed below prior to using this
product. Failure to do so may result in serious personal injury and / or property damage.
Do not expose this product to heat sources (including open flame or direct sunlight)
Do not expose this product to water or liquids. If liquid enters the product, immediately unplug
the product from any connected power sources or devices.
Do not disassemble or modify the product
Avoid dropping this product (or any other heavy impact which might damage the internal
circuit)
In the unlikely event of any abnormalities (such as strange odor, overheating, leaking, color
change, etc.),discontinue use immediately.
Avoid cleaning this product using liquids or chemical substances (use dry cloth only)
Only use attachments/accessories specified by the manufacturer
Dispose of this item properly (do not dispose of it in trash receptacles and do not attempt to
incinerate it)
Do not leave this product unattended while it is in use or while it is being charged
This product is not a toy: KEEP AWAY FROM CHILDREN
Only re-charge this device using a USB port wall adapter (not included)
Do not re-charge via USB port on a computer
Do not use this product while it is being charged
When not being used for prolonged periods of time please charge every 3 months to avoid
damaging the battery
The T306 is a high quality Wireless 4.0 CSR HD Audio Headset which features ANC (Active Noise
Cancelling), aptX® & a 3.5mm audio jack for manual connections. Please read below production
specifications & user guide.
T306 Specifications
Battery Type: Lithium Polymer
Battery Duration/Lifespan: 500 times
Capacity: 300 mAh
Power Input & Current: DC 5V/0.2A
Sound Output: 10mW
Sensitivity: 113 dB
Frequency Response: 20Hz – 20KHz
Distortion Rate: <1%@THD
WARNING
Safety Precautions
T306 User Manual

Publicidad

loading

Resumen de contenidos para Spector&Co T306

  • Página 1 T306 User Manual The T306 is a high quality Wireless 4.0 CSR HD Audio Headset which features ANC (Active Noise Cancelling), aptX® & a 3.5mm audio jack for manual connections. Please read below production specifications & user guide.
  • Página 2 T306 Operation 1. On: slide the power switch ON – blue LED will flash to indicate the headset has been turned on (in standby mode) NOTE: previously paired devices will automatically connect to the T306 headset 2. Off: slide the power switch OFF – red LED will flash to indicate the headset has been turned...
  • Página 3 (White LED will remain lit to indicate ANC mode) To Charge the T306 1. Insert micro USB into the T306 & connect the USB output to a wall adapter (not included) 2. Red LED indicates the device is charging (Red LED will turn off once fully charged) 3.
  • Página 4 FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Página 5 éviter d’endommager la batterie. MANUEL DE L’UTILISATEUR DU T306 Le T306 est un casque d’écoute de qualité HD Sans Fil 4.0 CSR, doté de technologie active de réduction de bruit, aptX® et une prise audio de 3.5mm pour connexion manuelle. Veuillez lire ce- dessous les spécifications techniques et le mode d’emploi du produit.
  • Página 6 1. Allumer : glisser le bouton d’allumage à la position ON – lumière LED bleue clignotera pour signaler que le casque d’écoute est allumé (en mode veille) NOTE: les dispositifs préalablement appariés se connecteront automatiquement au casque T306 2. Éteindre : glisser le bouton d’allumage à la position OFF – lumière LED rouge clignotera pour...
  • Página 7 4. Contrôle du volume : appuyer rapidement sur les boutons +/- 5. Sauter chansons : appuyer sur les boutons +/- et maintenir enfoncé NOTE: Si le T306 est allumé et connecté mais n’est pas utilisé pendant 10 minutes, le casque entrera en mode veille (mode d’économie d’énergie). Appuyer sur pour recommencer à...
  • Página 8 DÉCLARATION DE LA FCC Cet appareil est conforme au point 15 du règlement de la FCC. Son fonctionnement est soumis aux deux conditions suivantes : (1) L’appareil ne devrait pas causer d’interférences nuisibles et (2) Ne devrait pas voir son fonctionnement altéré par des interférences nuisibles. Cet équipement a fait l'objet de tests ayant démontré...
  • Página 9 MANUAL DEL USUARIO DEL T306 El T306 es un casco de auriculares de calidad HD Sin Cables 4.0 CSR, con cancelación activa del ruido, aptX®, codificación avanzada de audio y conector de audio de 3.5 mm para conexión manual.
  • Página 10 2. Apagar: deslizar el botón de encendido a la posición OFF – luz LED roja parpadeará para señalar que los auriculares están apagados. Apareamiento Sin Cables 1. Una vez que el T306 está encendido – mantener oprimido el botón de apareamiento hasta...
  • Página 11 ANC). Carga del T306 1. Insertar el extremo micro USB en el T306 y conectar la salida USB a un adaptor de pared (no incluido) 2. La luz LED roja señala que el dispositivo está cargando (La luz LED roja se apagará una vez terminada la carga).
  • Página 12 DÉCLARACIÓN DE LA FCC Este aparato cumple con la norma 15 del reglamento de la FCC. Su funcionamiento debe cumplir con las siguientes condiciones: (1) El aparato no debería causar interferencias perjudiciales y (2) Su funcionamiento no debería afectarse a causa de interferencias perjudiciales. Este aparato ha sido objeto de pruebas que demuestran cumplir con los límites exigidos a un aparato digital clase B, según las reglas de la FCC.