Terraillon X-LINE CONNECT Manual De Instrucciones página 14

TERRAILLON CONNECTED BODY COMPOSITION ANALYZER
To weigh and measure
1� You must have bare feet to be able to analyse your body mass�
2� Open the MyHealth application� If the application is not opened, the data will be saved in the scale�
3� Get on your scale� Stand still� Maintain contact with the electrodes until the " " signal stops moving from
left to right�
4� Display the measurement
The LCD screen then displays BMI and body masses (fat percentage, water percentage, muscle mass and
bone mass) for three times�
When your scale is successfully paired with your smartphone and the Bluetooth is ON, the scale will process
data transmission�
Automatically identify the user measurement.
1� When the user stand on the scale directly, the scale will turn on and lock the weight�
2� When the weight is stable, display moving " " means it is measuring� If it can identify the user successfully,
it will display the measurement� If it detect several similar weights, the profile number flashes� Use the
UP and DOWN buttons to select the user number, then press SET� Once you have selected the user,
the measurements will be displayed and then the unit will turn off� If you do not select a user within 10
seconds, the weight will be displayed for a few seconds and then the unit will shut off (the weight will not
be assigned to a user)�
3� If it occurred error or it can't identify the user, it will display the present weight and turn off�
WARNING INDICATORS
Overload :
remove weight immediately
14
EN
Battery low,
charge scales
Failure of pairing up
your scale with your smartphone�
T