Emergency Switch
If the remote control is lost or faulty, please follow the steps below.
• Start the air conditioner:
− If you want to turn on the air conditioner, just disconnect the
power of the air conditioner for more than three minutes, then
turn on the power, turn on the front panel, and gently press the
emergency switch button on the indoor unit. At this time, the
air conditioner will automatically determine the operation mode
according to the room temperature.
• Turn off the air conditioner:
− If you wish to turn off the air conditioner, simply press the
emergency switch button on the indoor unit.
NOTE
• The location of the emergency switch shown in the figure is a
schematic diagram of the possible location of the emergency
switch button, and the emergency switch button of some models
is on the display panel, please refer to the actual position for the
specific position.
• Press the emergency switch button every time for too long,
otherwise the air conditioner will enter an abnormal operation
state.
• If you can't reach it by hand, please touch the emergency switch
button with a sharper insulating object.
14
on/off switch
EN