Publicidad
Idiomas disponibles
Idiomas disponibles
Smart Mode (invalid for some
models) a
Press the Smart button, the unit enters Smart mode(fuzzy logic
operation). In this mode, temperature and fan speed are automatically
set based on the actual room temperature.
For the split-type models, such as wall-mounted air conditioners and
some floor-standing air conditioners, their operation mode and set
temperature should be determined based on the indoor temperature.
Heat Pump Models
Indoor temperature
21 °C or below
21 °C - 23 °C
23 °C - 26 °C
Over 26 °C
Cooling Only Models
Indoor temperature
23 °C or below
23 °C - 26 °C
Over 26 °C
NOTE
• The operation mode is determined by the difference between the
indoor temperature and set temperature.
• Smart button is ineffective in Jet mode. Press Mode button
cancel Smart mode.
• Temperature, airflow and direction are controlled automatically in
Smart mode. However, For the on/off, you can choose from -2 to
2 (for some models you can choose from -7 to 7), for the inverter
you can choose from -7 to 7. if you still feel uncomfortable.
Operation mode
Heating
Fan Only
decrease 2 °C after
Dry
Cooling
Operation mode
Fan Only
decrease 2 °C after
Dry
Cooling
Target temperature
22 °C
Room temperature
operate for 3
minutes
26 °C
Target temperature
Room temperature
operate for 3
minutes
26 °C
Dual
Light
Sensing
Off
Fan
Mode
Speed
Temp.
Jet
Smart
Mode
Room
Temp
Swing
Swing
Clock
Sleep
Timer
Timer
On
Off
EN
17
Publicidad
