NAVIGATION WITH THE MAIN
BUTTON
• Light click
Light click turns on the snooze
when the alarm goes off.
Use a slight push and feel the
gentle click sound.
• Deep press
Deep press activates and
deactivates the alarm.
For deep press, use a bit more
pressure than for light click.
As a result, the main button
will change position, causing
the orange band to be either
visible or not.
• Rotate
Rotating the main button
adjusts light intensity and
alarm volume, and will turn
on snooze when the alarm
goes off.
ACTIVATE AND DEACTIVATE
THE ALARM
The alarm is activated when
the main button is protruding
and the orange alarm band
is visible.
To deactivate the alarm, push
the main button in so the
alarm band is not visible.
ALARM IS ACTIVATED
AND WILL SOUND
ALARM IS DEACTIVATED
AND WILL NOT SOUND
NOTE: Due to the analog
mechanism characteristic,
when alarm is set up,
it will go off every 12 hours.
TURNING OFF THE RINGING
ALARM AND SNOOZE
ACTIVATION
To turn off the ringing alarm,
deactivate it with a deep
press. A light click or rotation
of the main button will trigger
a ten-minute snooze.
NOTE: If no interaction with the
main button occurs, snooze
will be triggered after three
minutes of ringing and will be
repeated three times. After
three snoozes, the device will
stop ringing.
ALARM SETTINGS
Use a long press on the
melody button for at least two
seconds to change the alarm
melody. The first melody will
start playing:
• Select alarm melody
Press the melody button again
to play the next melody. You
can choose from nine different
sounds.
• Adjust the volume
Rotate the main button to
adjust volume level.
• Save the setting
Each melody will be played
for 60 seconds. Then, without
any interaction, settings
will be saved automatically.
Use another long press on
the melody button to save
changes as well.
EN
3