Publicidad
Idiomas disponibles
Idiomas disponibles
eine!
mmm 6
TROUBLESHOOTING
* No power comes on.
* The battery is exhausted.
* Charge the battery pack or place new alkaline
batteries in the battery case.
'* Check the connector or remove and replace
the cable.
* Rotate [SQL] clockwise.
¢ Unplug the cable or headset,
* Push [F] then (® KEY LOCK) to deactivate the
lock function.
'* Push [CLR] to select frequency mode.
* Poor plug connection to the external DC power
cable.
* [SQL] is turned too far counterclockwise.
* A optional cable or headset is connected.
* No sound comes from the
speaker.
Frequency cannot be set. | © The lock function is activated.
* The emergency frequency is selected.
* Scan cannot be activated. | * The squelch is open.
* Rotate
[SQL]
counterclockwise
until
noise
disappears.
* Push [F] then [@ KEY LOCK] to deactivate the
lock function.
* The lock function is activated.
* The memory channel comments are displayed.
* Weather channel is selected. (U.S.A. only)
"Frequency
is not dis-
played.
* Transmitting is impossible.
'* Push [MR] to toggle between a comment and
frequency.
* Push [CLR] to select frequency mode.
© Resetting the CPU
CAUTION:
Resetting
the CPU
clears and
initializes all
programmed
contents
such
as memory
contents,
lockout
channel settings, etc.
CLEAR |
ABB
-
W h i
"CLEAR" appears
The default frequency
ee
[F], [0] and [ENT], turn power ON to reset
momentarily,
anneati
**"CLEAR' appears momentarily, the default frequency appears
and the transceiver's CPU is reset.
Publicidad
