Publicidad
Idiomas disponibles
Idiomas disponibles
Start
Start P: 00:00
Current P: 00:00
Delta P: 00:00
Display
Start pressure
Current pressure Measure the equipment pressure.
Pressure
difference
3 -
Press 【
4 -
Pressurize to the required test pressure.
5 -
Press 【
starts.
6 -
The interface displays the time, start pressure, current
pressure and pressure difference.
7 -
Press 【
relevant pressure value stops updating), and the timing
stops.
8 -
Press 【
restart the test.
9 -
Press 【
to the main interface.
WARNING
Units cannot be switched during the measurement process.
Pressure Leak Test
Based on the selected pressure units:
Start pressure shows initial pressure (without
connecting any equipment).
The current pressure minus the starting
pressure is the measured pressure value.
】 to convert the pressure unit.
】 to start the pressure leak test, and the timing
】 again to stop the pressure leak test (the
】 for the third time, clear the current value, and
】 to exit the pressure leak test mode and return
15
Time 00:01
Description
Publicidad
