Kukirin S1 Pro Manual De Usuario página 10

11 OPERATE INSTRUTION
Power Switch
Short press the power switch one second to turn on the scooter,long press the power switch three seconds to
turn o ffthe scooter.
Gear setting
Quickly press the power button twice continuously to switch gears, and the range can be set to 1st gear (up to
9km/h), 2nd gear (up to 17km/h), 3rd gear (up to 25km/h) Speed control
The accelerator will only start to take effect when t he scooters sliding speed is above 3km/h. Press t he
accelerator with the right thumb, and the user can control the speed range （1-25km/h).
Brake control
The greater the pressure on the left thumb electronic brake, the greater the bra king force .
LCD front light switch
In the power - on state, click the power button to switch the headlig hts .
Emergency brake
In case of an emergency, step on the brake with your foot. At this time, the rear wheel friction brake and
electronic brake can be realized at the same time. Under normal circumstances, please do not use the rear
emergency brake vigorously during high-speed driving to avoid riding risks or damage. For the rear wheel, the
company is not responsible for the damage and needs to be repaired for a fee.
Cruise control
The scooter initially sets the constant speed cruise speed . If you want to use it, you need to open the applet
and select the constant speed cruise speed . When t he ve hicle reac hes t he set cruising speed at a constant speed,
t he constant speed cruise function will be auto matically turned on . After the cruise control is turned on, you
can release the thumb accelerator, and the scooter will auto matically move forward at a constant speed . If you
need to cancel the cruise control function, press the electronic brake of the left thumb to cancel the cruise
control function, when the ve hicle speed reaches the set cruise speed again After that, the cruise control can be restarted .
12 RIDE INSTRUCTION
Riding preparation
1. Choose a suitable place to ride
2. Following the expand instruction
to expand the scooter and wear
guard tools.
S tart riding
1. Press down the power button,open the power.
2. Put one foot on the pedal,and another on the ground.
3.Slide the car body forward and gently press down the
right accelerator,the scooter will move forward slowly,
After driving smoothly, place your foot on the pedal at
the same time, press the right dial accelerator, the
greater the angle the faster you drive.
Note:To ensure driving safety,S1 Pro is Non-zero start,
the accelerator function can only be used after sliding
the car body forward for a certain distance.
Stop
1. In normal situation,press down the left
thumb e-brake,scooter will stop immidately,the
greater the depression angle,the greater the
braking force.
2. In an emergency, you can use your foot to
step on the rear brake to realize e-brake and
friction braking at the same time .