Descargar Imprimir esta página

JBM 51837 Manual De Instrucciones página 5

Ocultar thumbs Ver también para 51837:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
REF.51837
Features:
1. Vacuum cleaner dry type
2. Safety device to normally protect the machine operation.
3. There are some shots at the base, so you can conveniently store your accessories.
4. The function of breath can calm the different types of needs.
Technical Parameters:
Model specification: 51837
Voltage: 220-240V ~
Rated frequency: 50Hz
Rated Input Power: 1200W / 1400W
Maximum induction 19kpa
Attentions before use the product
1. Please do not use the vacuum cleaner
near liquids or gases which are flammable
and explosive, it is to avoid fire.
2. Before connecting and cutting the network, please turn off the
power supply, to avoid fire and electric shock.
3. Please do not touch the plug with wet
hands to avoid electric shock.
4. Please do not cover the top of machine
because the internal temperature is too
high. It is in order to prevent damage the
machine.
5. Do not aspire the following objects:
cigarettes, gas and kerosene not extinct,
and other objects that are flammable, ex-
plosive and volatile.
Coal, lime powder, gypsum and other
subtle things are easy to suck in the
bag filter to block it.
Accessories and connecting all cylinders
A. Connection between the tube and
the vacuum
1. Insertion: Insert the vacuum tube
connector and turn clockwise until the
connector is locked.
2. Hold the tube connector and
turn counterclockwise until it takes
the tube.
6. During use, there is the possibi-
lity that the tube and the machine
generate electricity, so please pay
attention.
7. Should not obscure the vacuum
to prevent the flue water into the
machine and damage the machine.
8. Warning: When the water gets out of the air outlet, to repair
or inspect the vacuum. Please do not overturn the machine in
order to prevent the water flowing in the motor and damage
the engine.You cannot use this product as a water pump to
prevent damage to the machine.
9. After each time finish the dust extraction, the maintenance and
the inspection, switch off the power supply and pull the plug.
10. Please do not put the vacuum
cleaner under the sun or other pla-
ces of high temperature to avoid
deformation of the plastic.
11. For the tube should not bend excessively, stretch it hard to
avoid tube damage.
12. Should not soak in water vacuum cleaner or rinse with wa-
ter to prevent flue water on electrical components and to avoid
causing personal injury. You must twist too dry soft cloth, then
wipe the surface lightly using it.
B. When breath function is used,
insert the main suction tube into the
port of breath, and turn clockwise
until it is locked. To remove, turn
counterclockwise and can make
the main tube.
· 5 ·

Publicidad

loading