Descargar Imprimir esta página

Chapman BT500 Instrucciones página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

Attachment
Before attachment, ALWAYS ensure the following:
All safety guards & decals are in good working order and correctly fitted
Lubrication points have been lubricated as per scheduled maintenance period
The tyres are free of damage and inflated to the correct pressure
Electrical connections are free of dirt and moisture
NOTE: This machine is designed to attach to the towing vehicle through a 50mm diameter ball hitch.
1.
Reverse the towing vehicle up to the machine.
2.
Attach the machine onto the towing vehicle's coupling.
3.
Attach the power cable to the control socket fitted on the towing machine, ensuring a secure connection.
Initial Set-up
Towing Vehicle Wiring
Initially the towing vehicle must be wired using the supplied two core power cable to be wired directly to the vehicle battery terminals. Failure to
wire the supplied dedicated feed directly to the battery may cause issues with towing vehicle electrics. Ensure the supply is suitably routed to
protect from heat and mechanical damage.
Battery Specification
12V DC Nominal, Minimum 18Ah battery
Initial Test Operation
In order to familiarise the operator(s) with the machine, first test the mechanism and controls on a flat surface, without using a bale of fodder.
Once happy with the principles of operation then test using a suitable round bale before proceeding to use as normal.
Remote Battery Replacement / Pairing
If left on the remote will drain it's internally battery – replace as required with a 27A (12v) battery which are readily available. After replacement
you may need to re-pair the remote to the receiver as follows:
1.
Turn off power to receiver (unplug Anderson connector) and turn off remote handset
2.
Turn on remote handset.
3.
Press and hold IN & OUT buttons continuously. Whilst holding these buttons turn on power to receiver.
4.
Release IN & OUT buttons.
5.
Check operation both in and out to ensure pairing is complete.
Operating Limits
Minimum / Maximum Temperature:
Maximum Bale Weight:
Maximum Bale Diameter:
Maximum speed:
Battery Voltage:
DO NOT OPERATE BEYOND OPERATING LIMITS, DAMAGE TO MACHINERY OR INJURY TO
-5°C / +40°C
900kg [ensure towing vehicle is suitable for towing a load of this weight]
1.5m (5')
8 km/h (5mph)
12V DC nominal
OPERATOR MAY OCCUR.
Page 4
English

Publicidad

loading