Publicidad
Idiomas disponibles
Idiomas disponibles
Replacing Fuse
Disconnect from the main power supply first, then remove the fuse holder above the IEC Socket to reveal the fuse.
Replace the correct fuse rating as stated on lighting or user guide.Then, lock the fuse holder cover back into place.
General maintenance
To maintain optimum performance and minimize wear, the item should be cleaned frequently.Usage and environment
are contributing factors in determining frequency. As a general rule,fixtures should be cleaned after use to avoid dust
build-up and blockages, which can result in poor performances, overheating and breakages. Be sure to power off fixture
before conducting maintenance.
Unplug fixture from power. Use a vacuum or air compressor and a soft brush to remove dust collected on external vents
and internal components. Clean the external case when the fixture
is cold with a dry cloth or tissue, and drag dirt and grime to the outside case.
Layout FS-HAZER-01
Operation for FS-HAZER-01
When you first turn on the FS-HAZER-01 machine you show wait for around 2 minutes while the unit warms up. When
completed you will have access to various options if the wired remote control is not connected.
Press menu to scroll through the various options listed below. Use the up and down keys to set the secondary function
Display
D001-D512
H 0-5
F 0-5
Flash
User manual MAQUINA DE NIEBLA-HAZE MACHINE | Rev. May 2014
Function
DMX Address
Manual haze output 0=off, 1=low, 5=high
Manual fan speed 1=slow, 5=high
Fluid-less protection, please add fluid.
Publicidad
