Ryobi PCL031 Manual Del Operador página 2

WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS. Fail-
ure to follow all instructions listed below, may result in
electric shock, fire and/or serious personal injury.
WARNING!
When using electric appliances, basic precautions should
always be followed, including the following:
WORK AREA
Keep your work area clean and well lit. Cluttered benches
and dark areas invite accidents.
Keep bystanders, children, and visitors away while oper-
ating an inflator. Distractions can cause you to lose control.
Operate inflator in an open area at least 18 in. away from
any wall or object that could restrict the flow of fresh air
to ventilation openings.
ELECTRICAL SAFETY
To reduce the risk of electrical shock, do not put inflator
in water or other liquid. Do not place or store appliance
where it can fall or be pulled into a tub or sink.
Use this product only with batteries and chargers listed in
tool/appliance/battery pack/charger correlation supple-
ment 987000-432.
PERSONAL SAFETY
Stay alert, watch what you are doing and use
common sense when operating an inflator. Do not use
inflator while tired or under the influence of drugs, alco-
hol, or medication. A moment of inattention while operating
inflator may result in serious personal injury.
Dress properly. Do not wear loose clothing or jewelry.
Contain long hair. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry, or long hair can be
caught in moving parts.
Do not overreach. Keep proper footing and balance at
all times. Proper footing and balance enable better control
of the inflator in unexpected situations.
Use safety equipment. Always wear eye protection. Dust
mask, non-skid safety shoes, hard hat, or hearing protection
must be used for appropriate conditions.
Eye protection is required to guard against flying fas-
teners and debris which could cause severe eye injury.
Do not wear loose clothing or jewelry. Contain long
hair. Loose clothes, jewelry, or long hair can be drawn into
air vents.
Do not use on a ladder or unstable support. Stable foot-
ing on a solid surface enables better control of the inflator
in unexpected situations.
GENERAL SAFETY RULES
2 — English
Do not disassemble the inflator.
Do not operate inflator near flammable liquids or in
gaseous or explosive atmospheres. Internal sparks may
ignite fumes.
Do not store your inflator in a damp or wet location. Do
not store in locations where the temperature is less than
50° F or more than 100° F. Do not store in outside sheds
or in vehicles.
INFLATOR USE AND CARE
Check hoses for weak or worn condition before each use,
making certain all connections are secure. Do not use if
defect is found. Purchase a new hose or notify an authorized
service center for examination or repair.
Release all pressures within the system slowly. Dust and
debris may be harmful.
Do not use inflator if switch does not turn it on or off.
An inflator that cannot be controlled with the switch is
dangerous and must be repaired.
Place the switch off position before making any
adjustments, changing accessories, or storing the in-
flator. Such preventive safety measures reduce the risk of
starting the inflator accidentally.
Store idle inflators out of reach of children and other
untrained persons. Inflators are dangerous in the hands
of untrained users.
Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that may af-
fect the inflator's operation. If damaged, have the infla-
tor serviced before using. Many accidents are caused by
poorly maintained tools.
Use only accessories that are recommended by the
manufacturer for your model. Accessories that may be
suitable for one inflator may create a risk of injury when used
on another inflator.
Keep the inflator and its handle dry, clean, and free from
oil and grease. Always use a clean cloth when cleaning.
Never use brake fluids, gasoline, petroleum-based products,
or any strong solvents to clean your inflator. Following this
rule will reduce the risk of loss of control and deterioration
of the enclosure plastic.
Never point any inflator toward yourself or others.
Keep the exterior of the inflator dry, clean, and free from
oil and grease. Always use a clean cloth when cleaning.
Never use brake fluids, gasoline, petroleum-based products,
or any strong solvents to clean the unit. Following this rule
will reduce the risk of deterioration of the enclosure plastic.
Do not exceed the pressure rating of any component in
the system.
Protect material lines and air lines from damage or punc-
ture. Keep hose and power cord away from sharp objects,
chemical spills, oil, solvents, and wet floors.