Radioddity GA-5WB Manual página 6

1.6 Set the VFO frequency
※ Set the VFO frequency of the radio through the
keyboard:
When the radio is in VFO mode, you can input the
frequency of the main channel through the number
keys, if you want to input 434.62500MHz, just
【4】【3】 【4】【6】【2】 【5】【0】【0】.
Press * key to set step frequency, press # key to switch
AM/FM mode.
※ Adjust the VFO frequency/channel by the up and
down arrow bu ons:
When the radio is in VFO mode, click the up and down
arrows to adjust the frequency/channel by increasing/
decreasing the step value. Up adjustments increase
frequency values/channels, and down adjustments
decrease frequency values/channels.
1.7 Storage frequency
In VFO mode, enter the frequency you want through the
number keyboard, such as 438.500, press OK to confirm,
press the menu "save tochannel", select a blank channel
to save.
1.8 Saving frequencies with CTCSS/DCS
In VFO mode, input the frequency you want through the
number keyboard, such as 438.500,press OK to confirm,
Open the radio se ng menu, enter the transmit TX/RX
subtone menu, select the required subtone frequency,
input