To programme favourites
Your favourite stations are saved as follows:
1. Press the device button e for the device that you want to
save a favourite.
2. Hold down the S button r for a little longer than 3 sec-
onds. The notice "LANGUAGE SETUP" appears.
3. With the or button t select "FAV CH SETUP" and
confirm with the OK button l. In the display "FAV CH 1
SETUP" appears.
4. With the or button t select the memory slot to be
programmed (FAV CH 1 - 4 SETUP) and confirm with the
OK button l.
5. In the LCD display q "FAV CH STEP" appears. Now
press, one after the other, the buttons (max. 4) for access
to your desired favourite stations.
6. When the maximum number of button commands is
reached the LCD display q shows "FULL".
7. Save the entry with the S button r. In the LCD display q
"FAV CH SETUP 1 - 4" appears.
8. If, with the selection of the favourites to be programmed
(step 4), you select a memory slot that is already occu-
pied the existing favourite will be overwritten.
9. Repeat the steps to apply further favourites.
10. With the EXIT button y you move a level backwards in the
menu except during the entry of the button commands.
Note:
The input of the channel numbers can vary according to
the model and brand of the selected devices. If necessary,
with multi-digit channel numbers you must first press the
button a.
To access favourites
To access a pre-programmed favourite press the FAV/EPG
button 1( followed by the corresponding number button for
the desired memory slot (1 - 4).
Delete All FAV channels
To delete all pre-programmed favourites proceed as follows:
1. Hold down the S button r for a little longer than 3 sec-
onds.
2. With the or button t select "FAV CH SETUP" and
confirm with the OK button l. In the display "FAV CH 1
SETUP" appears.
3. With the or button t select "FAV CH CLEAR" and
confirm with the OK button l.
4. In the LCD display q "CONFIRM CLEAR" (confirm delete)
appears. Confirm the delete process with the OK button l.
The LCD display q shows "SUCCESS". All favourites are
now deleted and the menu will end.
Tips:
1. When the LCD display q shows "CONFIRM CLEAR" you
can stop the delete process with the EXIT button y.
- 54 -