Tecsis P3298 Manual De Instrucciones página 19

6. Packaging / 7. Starting, operation
6. Packaging
Has everything been supplied?
Check the scope of supply:
Completely assembled pressure sensors
Inspect the pressure sensor for possible damage during transportation. Should there

be any obvious damage, inform the transport company and tecsis without delay.
Keep the packaging, as it offers optimal protection during transportation

(e.g. changing installation location, shipment for repair).
Ensure that the pressure connection thread and the connection contacts will not be

damaged.
In order to protect the sealing cone, the pressure connection of the instrument P3298 is
provided with a special protection cap.
Remove this protection cap only just before installing the pressure sensor in order to

prevent any damage to the sealing cone or the thread.
Keep the protection cap of the pressure connection thread and the diaphragm for later

storage or transport.
Mount the protection cap when removing and transporting the instrument.

7. Starting, operation
Required tools: wrench (flats 27), screw driver
Use the pressure sensor only if it is in a faultless condition as far as the
!
safety-relevant features are concerned.
Warning
Betriebsanleitung/Operating instructions/Mode d'emploi/Instrucciones de servicio
GB
19