Descargar Imprimir esta página

Roadstar CDR-4550U Manual De Instrucciones página 6

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19
disappears from the display.
3.
To repeat the FOLDER (ALBUM), press the PROGRAM/ P-MODE button 2 times.
FOLDER will appear on the display.
Press the P-MODE button 3 times more to cancel FOLDER repeat. The indicator
FOLDER
disappears from the display.
4.
To repeat the entire disc, press the PROGRAM/ P-MODE button 3 times.
on the display.
Press the PROGRAM/ P-MODE button button 2 times more to cancel all disc repeat.
The indicator
disappears from the display.
PROGRAMMED PLAYBACK FOR CD/USB
IN CD/USB
1.
Press the PLAY/PAUSE button (6) and after 5 seconds the STOP button (3).
2.
Press the PROGRAM/P-MODE button (2). The track number "P-01" will appear and
"PROG" will appear on the display indicating the first selection.
3.
Press SKIP DN () or SKIP UP () button to select the desired track to be programmed.
The track number which will be programmed will appears on the display.
4.
Press once the PROGRAM/ P-MODE button to enter the track into memory. "P-02" will appear.
5.
Repeat the steps 3 and 4 to program up to 20 tracks in CD or 99 tracks in MP3.
6.
Press PLAY/PAUSE (II) button (6) once to start programmed playback.
7.
To cancel programmed playback, press the STOP button (3) twice.
Note:
During program playback, if you wish to repeat the entire programmed playback,
press the PROGRAM/ P-MODE button (2) repeatedly until the
on the display.
IMPORTANT
Since movement of the CD mechanism and the sensitive circuitry may cause interference to
a radio tuner nearby switch this unit off while operating other radio devices.
This product utilizes a laser
Danger -
Invisible laser radiation when opened and interlock failed or defeated. Avoid
direct exposure to the beam.
Caution - Use of controls, adjustments, or procedures not listed in this manual may result
in hazardous radiation exposure.
Concerning Compact Discs
Only compact discs identified with this mark can be used with
this player.
7
English
will appear
indicator appears
8
English
SPECIFICATIONS
Power Supply
AC:
230V ~ 50Hz
Batteries:
6 x UM-2
Radio Frequency Coverage
FM:
87.5 - 108 MHz
MW:
540 - 1600 kHz
General
Output Power
2 x 1.5 Watt
CD Player
Pick Up:
3-Beam. Semiconductor Laser
Encoding:
16-Bit Linear
Power Consumption
12,5 W
Note: Specifications and the design are subject to possible modifications without notice
due to improvement.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature, indicates that it
should not be disposed with other household wastes at the end of its
working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from
other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed
with other commercial wastes for disposal.

Publicidad

loading