The firmware updating app will then let you know whether the procedure has been
successful.
The racing wheel self-calibrates (automatic movements of the wheel rim from left to
right), and its LED lights up again.
Click OK then close the Firmware updater.
Note: In the event that this procedure fails, repeat the entire procedure from the
beginning — but this time connecting the USB connector to another USB port
on your computer (or perform the procedure on a different computer).
If the problem persists, please contact our technical support team: they will
provide you with other solutions.
10) Test your TX Racing Wheel in the Control Panel
On your keyboard, simultaneously press the Windows and R keys.
-
The Run window opens: type joy.cpl and then click OK
Update : January 2024