cecotec TOTALPURE 2IN1 MOONSTYLE Manual De Instrucciones página 14

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Main body
2. Air-outlet halo
3. Filter
Aluminium tube
4.
5. AC adapter
6. Air-outlet halo screw (x1)
7. Base bolt (x1)
Allen key (x1)
8.
9. Base
10. Remote
11. Instruction manual
Control panel. Fig. 2
Icons
1. Mode icon
Timer knob
2.
3. Power/Standby icon
4. Rotation icon
5. Settings icon
Indicators
6. Automatic Mode indicator
7. Strong Breeze Mode indicator
8. Sleep mode indicator
Natural Breeze Mode indicator
9.
10. Wi-Fi indicator
11. Filter Replacement indicator
Remote. Fig. 3
1. Mode button
2. Rotation button
3. Rotation Angle button
Display power button
4.
5. Light
6. Power button
7. Timer button
26 TOTALPURE 2IN1 MOONSTYLE/DARK
8. Air Volume Increase button
9. Air Volume Decrease button
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
appliance.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the appliance
when transporting it in the future. In case the original packaging is disposed of, make sure
all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
3. ASSEMBLY
Fig. 4
1. Install the lower part of the aluminium tube in the base by fitting it into the base plinth
and secure it with the base bolt using the Allen key.
2. Screw the main body onto the top part of the aluminium tube by turning it clockwise (the
lower part is the one with the internal thread).
3. Install the air-outlet halo by fitting it to the main body.
4. Insert the screw of the air-outlet halo into the hole at the bottom of the air-outlet halo.
Installing the air filters
- This appliance is equipped with an air-purifying filter to be installed in the motor before
use.
- The appliance features a memory function. After 720 hours of operation, the Filter
Replacement indicator will light up on the control-panel display. After replacing the air
filter, hold down the Power button on the remote for 5 seconds to turn off the appliance:
the filter operating time will be reset.
Steps for installing the filter. Fig. 5
1. Turn the filter cover counterclockwise to remove it.
Insert the filter into the back of the main body.
2.
3. Reattach the filter cover by turning it clockwise.
ENGLISH
TOTALPURE 2IN1 MOONSTYLE/DARK 27