Sthor 78138 Manual Original página 12

TOOL DESCRIPTION
A sabre saw is a power tool designed for cutting wooden and wood-based surfaces, polyethylene or polypropylene panels and
metal with blades properly selected for the type of material. Thanks to the easy replacement of the blades, which requires no ad-
ditional tools, the saw allows for a wide range of use in construction work. Proper, reliable and safe operation of the tool depends
on appropriate use, that is why you should:
Read the entire instructions manual before the fi rst use of the tool and keep it for future reference.
The supplier shall not be held liable for any damage or injury resulting from improper use of the tool, failure to observe the safety
regulations and recommendations of this manual. Use of the tool for purposes other than those for which it was intended shall
cause the loss of the user's rights to the warranty, as well as under inconsistencies with the agreement.
EQUIPMENT
The product is supplied complete and does not require assembly. The following items are supplied with the product: battery, charg-
ing station (charger). The product part number 78138 is not equipped with a battery and charging station.
TECHNICAL DATA
Parameter
Part no.
Rated voltage
Rated rpm
Cutting thickness (max)
- wood
- metals
Blade holder
Blade stroke
Noise level
- sound pressure
- power
Vibration level (wooden board/beam cutting)
Protection rating
Insulation class
Weight
Battery type
Battery capacity*
Charger*
Input voltage
Mains frequency
Output voltage
Output current
Rated power
Charging time**
* only for models equipped with a battery and charger
** the specifi ed charging time applies only to the battery with the capacity listed in the table
The declared noise emission value has been measured using the standard test method and can be used to compare one tool to
another. The declared noise emission value can be used in the preliminary exposure assessment.
The declared total vibration value has been measured using the standard test method and can be used to compare one tool to
another. The declared total vibration value can be used in the initial exposure assessment.
Caution! The vibration emission during tool operation may diff er from the declared value, depending on the manner the tool is used.
Caution! Safety measures to protect the operator, which are based on an assessment of exposure under actual conditions of use
(including all parts of the work cycle, such as the time when the tool is switched off or idle and the activation time), must be specifi ed.
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and specifi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
O R I G I N A L
12
EN
Unit
[V]
[min ]
-1
[mm]
[mm]
[mm]
[dB(A)]
[dB(A)]
[m/s ]
2
[kg]
[Ah]
[V]
[Hz]
[V]
[mA]
[W]
[h]
I N S T R U C T I O N S
Value
78138, 78139
20 DC
0 – 3000
115
10
universal 1/2" (12.7 mm)
23
83.4 ± 3.0
94.4 ± 3.0
10.847 ± 1.5 / 9.852 ± 1.5
IPX0
III
1.7
Li-Ion
2
110 – 240
50/60
21.5 DC
2.2.
47
1