Press the ■ 'set' button and value is saved.
Manual regeneration will start by pressing the ❑ 'menu' button.
CAN I ADJUST THE SALT REFILL ON THE TIMER
CONTROLLED UNIT?
The salt refill is preset for you. Should you need to adjust, you will
need to unscrew the back plate on the control valve.
Refill volume can be adjusted through refill regulator (2).
To adjust the refill volume, release the screw (1) by a half turn, and
then turn the Refill Regulator to the correct volume to '2'. Finally
tighten the screw (1).
I'M GETTING HARD WATER WHAT SHOULD I DO?
If you unexpectedly experience hard water, make these simple
checks before calling Water2buy.
RUN MANUAL REGENERATION
See above
POWER SUPPLY
Check your power supply cable. Check that is plugged fully into the
electric outlet. Be sure that the power outlet is switched on. Reset