Panasonic CQ-R155SEUC Manual De Instrucciones página 21

2. Secure the rear of the unit.
a) Check the electrical connection by referring to this operating instructions.
b) Connect the Mounting Bolt 6) using a suitable wrench.
c) insert the Power Connector © to the unit.
© Power const $F
Unit KR
À (6) Mounting Bolt
d) Insert the unit into Mounting Collar @ and push it in until "click" is heard.
e) Secure the rear of the unit to the car by either of the two recommended methods as follows.
E Using the Rear Support Strap ©)
Affix one end of the Rear Support Strap @ to the rear of the unit, and the other end to the Fire Wail
of Car, or some other metallic area.
@ Using the Rubber Cushion (Optional)
(If there is an existing Rear Support Bracket on the Fire Wall of Car.)
Cover Mounting Bolt on the rear of the unit with Rubber Cushion (Optional), and mount it into the
existing Rear Support Bracket.
Fire Wall of Car
Rear Support Bracket
@ Tapping Screw
3 mmo
(existing on the car)
Rubber Cushion
(Optional) |
Hex. Nut
B®
@ Rear Support Strap
© Mounting Bolt © Mounting Bolt
3. After installation, reconnect the negative (-) battery terminal.
21
CQ-R155SEUC