Panasonic CQ-R155SEUC Manual De Instrucciones página 8

Power and Sound Controls
Power
if the car is not running yet, turn the key in the ignition until the
accessory indicator lights.
Press PWR to switch on the power.
Volume
e Press "A" or "v" to increase or decrease volume.
Pus
UUL 3 H Volume Level
{
0 to 39
e Press" A" or "v" for more than 0.5 second to change numeric
levels on the display rapidly.
Mute
e Press M/L (MUTE/LOUD) to decrease Volume level.
e "MUTE" blinks while this operation,
e Press and hold M/L (MUTE/LOUD) for more than 2 seconds to
e Press and hold M/L (MUTE/LOUD) for more than 2 seconds again
N OC 7
— | MUTE | —
y Y ¡|
enhance bass and treble tones when listening at low or medium
to deactivate when listening at higher volumes.
e Press M/L (MUTE/LOUD) again to cancel.
es Es
Pross and A
CE, volume.
4 ON
i DN]
Tone Enhancement
v e
Note: This unit is equipped with an anti-volume-blast circuit which serves as an automatic volume
level adjuster so that you will not be deafened with sudden loud volume.
This system operates as follows. When PWR is switched on, the volume level is low. After that, the
volume level gradually returns to the level as the same as the one before turning off.
Anti-volume-blast circuit is not effective when volume level is lower than position 20 at the display.
CQ-R155SEUC