Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
Placement:
A. If the TV is placed on a table, place the device on the table directly
in front of the TV.
B. If the TV is attached to a wall, mount the device on the wall directly
below the TV screen.
Wall mounting
• While mounting, take extra care or hire a technician to do it.
• Before mounting, make sure, that the wall is suitable for hanging
such devices. Producer is not responsible for damaged caused by
improper installation on a wall.
• Required tools are not included in set.
• Before drilling, make sure that there are not any wires inside a wall.
1. Drill 2 holes. The distance between the handles is to be 480 mm.
2. Fix a dowel into each hole in the wall. Tighten the wall mount
brackets on the wall with screws. Make sure, that they are securely
installed.
3. Slide the device into wall mount brackets.
EN
24
Owner's manual
A
B
Owner's manual
CONNECTING
Connecting to power supply
Connect the AC plug to the power socket. Plug the cord to a mains
socket.
HDMI connection
Metoda 1: ARC (Audio Return Channel)
The ARC function allows to send audio from ARC-compliant TV to
soundbar with a single HDMI cable. Connect the HDMI cable and
switch to HDMI (eARC/ARC). TV remote control can now be used for
controlling soundbar volume. TV must support ARC function as well
as HDMI-CEC.
Metoda 2: standardowe HDMI
If the TV does not support ARC, soundbar can be connected with
standard HDMI cable.
1. Connect the HDMI to HDMI output on the soundbar and to TVs
HDMI input.
2. Connect external devices to soundbars HDMI input.
Connecting with AUX socket
After plugging the cable to the AUX input, the speaker will automatically
go to AUX mode. To control played music, use external device.
Playing via USB
After plugging the USB drive, the speaker will automatically go to USB
mode. To control played music, use buttons on the remote control.
Caution:
• The soundbar supports USB drives with capacity up to 32 GB.
• The soundbar plays MP3 files only.
EN
25
Publicidad
