Descargar Imprimir esta página

Krüger & Matz KM0575 Manual Del Usuario página 14

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 16
OPERATION
Turning on
1. To turn the soundbar on or off, press the power button on the
remote control or press and hold the power button on the
soundbar.
Mode selection
To change the playback mode, use the power / mode select button on
the soundbar or press the INPUT button on the remote control.
Selected mode will be shown on the display.
Sound adjustment
• To adjust the bass and treble level, use the BASS and TREBLE buttons.
• Use the EQ button to change the effect.
• To change the volume level, use the VOLUME buttons.
• To mute the sound, press the mute button.
BLUETOOTH
Before pairing:
• Bluetooth range is around 8 meters. Do not exceed the range.
• Manufacturer does not guarantee compatibility with all external devices.
• Make sure, that between the soundbar and external device, there
are no obstacles.
Pairing
EN
1. Turn on the soundbar and external device.
2. "BT" message will appear on the display.
3. Turn on the Bluetooth function on external device. Search for
available devices and choose "KM0575".
4. Begin pairing. If password is required, input 0000.
5. After succesfull pairing the audio cue will be played.
6. You can now play the music via Bluetooth. If external device
supports AVRCP function, it is possible to control the music with the
remote control.
7. To disconnect the currently connected external device, press the
PAIR button on the remote control.
26
Owner's manual
Owner's manual
TROUBLESHOOTING
• Make sure that the power cords are connected
correctly.
No power
• Make sure that the power socket has power in
it.
• Press the power button
• Select the correct source.
• Reduce the distance between the remote
control and the soundbar
Remote control
• Make sure that the batteries are installed
does not work
correctly
• Replace the batteries
• Aim the remote control into the IR sensor
• Make sure that the sound is not muted
• Unplug both devices and plug them again
No sound
• Make sure that the source is set correctly
• Format is not supported
Can't pair
• Make sure that the Bluetooth function is
Bluetooth
enabled
device
• Make sure that the pairing mode is enabled
The subwoofer
• Check connection between subwoofer and
does not work
soundbar.
EN
27

Publicidad

loading